A pale driftwood branch curves from the floor in a wide crescent, arching up behind your desk chair and overhead, where a deep conical mushroom cap hangs directly above your workspace. Warm golden light fans through hundreds of hand-carved gill lines, casting a full sunburst of amber rays down across your desk, your laptop, your books, and the coffee cup beside your keyboard. The crescent stem frames your seated silhouette like a natural arch, turning an ordinary desk corner into something that belongs in an architecture magazine.
Crescent Arc Driftwood Stem
The stem is a single piece of naturally curved driftwood that follows a wide C-shaped crescent from the base up, over, and forward. The curve is smooth and continuous with no sharp bends or kinks. The driftwood surface is stripped of bark by years of natural weathering, revealing pale grey-silver heartwood with long grain lines, branch scars, and knot stubs along its length. The crescent shape means the stem starts nearly vertical at the base, sweeps backward and upward through the highest point of the arc, then curves forward and downward to where the cap hangs. Finding a piece of driftwood with this complete, unbroken crescent curve is the rarest sourcing challenge in the entire mushroom lamp collection. Each stem is selected over weeks of searching.
Deep Conical Cap with Gill Glow
The cap is shaped as a deep cone rather than a shallow dome, hanging face-down at the end of the arc. The depth of the cone creates a natural reflector that concentrates the gill glow into a focused downward pool of light. Hundreds of hand-carved gill lines radiate from the center outward to the flared rim. The LED strip inside shines through each carved channel, projecting warm 2700K rays in a tight, intense sunburst directly onto the desk surface below. The polished outer surface shows warm amber grain with flowing patterns and natural knots that catch reflected light from the room. Dimmable from full task lighting for focused work to a low ambient glow for late-night atmosphere.
Overhead Positioning
The crescent arc places the cap directly above a seated person's workspace, between 24 and 30 inches above the desk surface depending on lamp size. This is the same height as a ceiling pendant light but without any ceiling installation, wiring, or landlord permission. The light falls straight down, eliminating the shadows that side-positioned floor lamps create. Your hands, your keyboard, and your notebook are evenly lit from above.
Live Edge Slab Base
The base is a thick, irregular slab of natural wood with the live edge left intact. It sits on the floor behind or beside the desk chair. The slab is heavy and wide, providing the counterweight needed to balance the long crescent arc and the cap hanging at its far end. The organic shape of the slab complements the driftwood stem above it. A felt pad protects the floor. The braided cloth cord exits from the base and runs along the floor to the nearest outlet.
Specifications
  • Material: Naturally curved driftwood (crescent stem) + solid wood (cap) + live edge slab (base)
  • Light: Built-in LED strip, warm white (2700K), dimmable
  • Power: Braided cloth cord with foot dimmer
  • Stem: Crescent C-curved driftwood, cleaned, treated, sealed
  • Cap: Deep conical shape with hand-carved gill detail
  • Base: Live edge wood slab, counterweighted, felt pad
  • Finish: Natural oil on cap. Clear seal on driftwood and base.
  • Arc reach: 36-44" forward from base center (varies by size)
Placement
Built for a home office desk, a writer's table, a studio workspace, a reading corner, or a drafting table. The overhead light replaces a ceiling fixture or a desk lamp without any installation. Also works beside a dining table, a piano, or an artist's easel where focused overhead light is needed. The crescent silhouette makes it a sculptural statement piece in any room, on or off.
Care
Wipe the polished cap with a slightly damp cloth. Reapply wood oil once a year. Dust the driftwood arc with a soft dry brush. Check the base position periodically to ensure the lamp is balanced. LED components need no maintenance. Avoid excessive moisture.
Handcrafted by Vietnamese artisans. The crescent driftwood is sourced from naturally fallen wood and selected over weeks for its complete C-curve, structural strength, and visual balance. Every gill line on the cap is carved individually. No molds. No CNC machines. No two lamps will ever look the same.
Need a different size or arc reach? Contact our team to discuss custom dimensions, cap depth, or finish preferences.
✔️ Preview your design before production
✔️ Free shipping
✔️ 30-day satisfaction guarantee

Furniture Placement

  •  Position your furniture away from direct sunlight, or use blinds or curtains to reduce sun exposure.
  •  Always set your furniture on a level surface to preserve its balance and structure.

Cleaning & Upkeep

  •  Regularly wipe down your furniture with a soft, dry, or slightly damp cloth.
  •  Avoid using harsh chemicals like bleach or ammonia, as these can ruin the finish and damage the wood.

Weight Capacity & Use

  •  Respect the recommended weight limit for each piece to ensure its durability.
  •  When moving furniture, lift it instead of dragging or pushing to prevent surface scratches or joint damage.

Preventing Mold & Mildew

  •  Quickly wipe up any spills to stop moisture from penetrating the wood.
  •  In areas with high humidity, use a dehumidifier to maintain an ideal moisture balance.

Free Shipping On All Orders

Standard shipping is free on every order, with no minimum purchase required.

Estimated Crafting & Delivery Times

  • Processing & Crafting: Typically 7–14 business days, depending on the piece and design complexity.
  • Transit Time: Approximately 5–7 business days after dispatch, depending on your destination and carrier.
  • Estimated Total: Approximately 12–21 business days. Customer review time and agreed revisions may extend this estimate.
  • Duties & Taxes: Delivered Duty Paid (DDP) — Ashdeco covers all import duties, taxes and customs fees.

For made-to-order and personalised pieces, we share photos or videos for your review before finishing and again before dispatch. Finishing begins after you approve the unfinished piece. We pack and ship only after you approve the finished version.

Returns: 30-Day Return Policy, Eligible Issues

If your piece arrives damaged, defective or incorrect due to a fulfillment error, please contact support@ashdeco.com within 30 calendar days of delivery, including your order number and photos. We will review your claim and arrange an appropriate return or replacement. Return shipping for approved claims is fully covered by Ashdeco.

Please note: Made-to-order and personalised pieces are not eligible for returns due to a change of mind or personal preference. This does not affect support for damaged, defective or incorrect items. Please contact us before returning any piece.

Thy Tran Crafted by

Thy Tran

Crescent Arc Driftwood Mushroom Floor Lamp with Gill Glow

SKU: ASPF070426-61.1
5 out of 5 stars with 400+ reviews 30 Questions
$2,880.00
10% Get 10% off orders $2,000+
Choose your sizeRequest a free consultation12"W x 36"D x 66"H
Choose your wood tone As pictured
Choose your finish Smooth Surface
Free Shipping - Easy Assembly
30-Day Returns
1-Year Warranty
Shipping Insurance
Share:
Thy Tran Crafted by

Thy Tran
Crescent Arc Driftwood Mushroom Floor Lamp with Gill Glow
SKU: ASPF070426-61.1
5 out of 5 stars with 400+ reviews 30 Questions
$2,880.00
10% Get 10% off orders $2,000+
Choose your sizeRequest a free consultation12"W x 36"D x 66"H
Choose your wood tone As pictured
Choose your finish Smooth Surface
Free Shipping - Easy Assembly
30-Day Returns
1-Year Warranty
Shipping Insurance
A pale driftwood branch curves from the floor in a wide crescent, arching up behind your desk chair and overhead, where a deep conical mushroom cap hangs directly above your workspace. Warm golden light fans through hundreds of hand-carved gill lines, casting a full sunburst of amber rays down across your desk, your laptop, your books, and the coffee cup beside your keyboard. The crescent stem frames your seated silhouette like a natural arch, turning an ordinary desk corner into something that belongs in an architecture magazine.
Crescent Arc Driftwood Stem
The stem is a single piece of naturally curved driftwood that follows a wide C-shaped crescent from the base up, over, and forward. The curve is smooth and continuous with no sharp bends or kinks. The driftwood surface is stripped of bark by years of natural weathering, revealing pale grey-silver heartwood with long grain lines, branch scars, and knot stubs along its length. The crescent shape means the stem starts nearly vertical at the base, sweeps backward and upward through the highest point of the arc, then curves forward and downward to where the cap hangs. Finding a piece of driftwood with this complete, unbroken crescent curve is the rarest sourcing challenge in the entire mushroom lamp collection. Each stem is selected over weeks of searching.
Deep Conical Cap with Gill Glow
The cap is shaped as a deep cone rather than a shallow dome, hanging face-down at the end of the arc. The depth of the cone creates a natural reflector that concentrates the gill glow into a focused downward pool of light. Hundreds of hand-carved gill lines radiate from the center outward to the flared rim. The LED strip inside shines through each carved channel, projecting warm 2700K rays in a tight, intense sunburst directly onto the desk surface below. The polished outer surface shows warm amber grain with flowing patterns and natural knots that catch reflected light from the room. Dimmable from full task lighting for focused work to a low ambient glow for late-night atmosphere.
Overhead Positioning
The crescent arc places the cap directly above a seated person's workspace, between 24 and 30 inches above the desk surface depending on lamp size. This is the same height as a ceiling pendant light but without any ceiling installation, wiring, or landlord permission. The light falls straight down, eliminating the shadows that side-positioned floor lamps create. Your hands, your keyboard, and your notebook are evenly lit from above.
Live Edge Slab Base
The base is a thick, irregular slab of natural wood with the live edge left intact. It sits on the floor behind or beside the desk chair. The slab is heavy and wide, providing the counterweight needed to balance the long crescent arc and the cap hanging at its far end. The organic shape of the slab complements the driftwood stem above it. A felt pad protects the floor. The braided cloth cord exits from the base and runs along the floor to the nearest outlet.
Specifications
  • Material: Naturally curved driftwood (crescent stem) + solid wood (cap) + live edge slab (base)
  • Light: Built-in LED strip, warm white (2700K), dimmable
  • Power: Braided cloth cord with foot dimmer
  • Stem: Crescent C-curved driftwood, cleaned, treated, sealed
  • Cap: Deep conical shape with hand-carved gill detail
  • Base: Live edge wood slab, counterweighted, felt pad
  • Finish: Natural oil on cap. Clear seal on driftwood and base.
  • Arc reach: 36-44" forward from base center (varies by size)
Placement
Built for a home office desk, a writer's table, a studio workspace, a reading corner, or a drafting table. The overhead light replaces a ceiling fixture or a desk lamp without any installation. Also works beside a dining table, a piano, or an artist's easel where focused overhead light is needed. The crescent silhouette makes it a sculptural statement piece in any room, on or off.
Care
Wipe the polished cap with a slightly damp cloth. Reapply wood oil once a year. Dust the driftwood arc with a soft dry brush. Check the base position periodically to ensure the lamp is balanced. LED components need no maintenance. Avoid excessive moisture.
Handcrafted by Vietnamese artisans. The crescent driftwood is sourced from naturally fallen wood and selected over weeks for its complete C-curve, structural strength, and visual balance. Every gill line on the cap is carved individually. No molds. No CNC machines. No two lamps will ever look the same.
Need a different size or arc reach? Contact our team to discuss custom dimensions, cap depth, or finish preferences.
✔️ Preview your design before production
✔️ Free shipping
✔️ 30-day satisfaction guarantee

Furniture Placement

  •  Position your furniture away from direct sunlight, or use blinds or curtains to reduce sun exposure.
  •  Always set your furniture on a level surface to preserve its balance and structure.

Cleaning & Upkeep

  •  Regularly wipe down your furniture with a soft, dry, or slightly damp cloth.
  •  Avoid using harsh chemicals like bleach or ammonia, as these can ruin the finish and damage the wood.

Weight Capacity & Use

  •  Respect the recommended weight limit for each piece to ensure its durability.
  •  When moving furniture, lift it instead of dragging or pushing to prevent surface scratches or joint damage.

Preventing Mold & Mildew

  •  Quickly wipe up any spills to stop moisture from penetrating the wood.
  •  In areas with high humidity, use a dehumidifier to maintain an ideal moisture balance.

Free Shipping On All Orders

Standard shipping is free on every order, with no minimum purchase required.

Estimated Crafting & Delivery Times

  • Processing & Crafting: Typically 7–14 business days, depending on the piece and design complexity.
  • Transit Time: Approximately 5–7 business days after dispatch, depending on your destination and carrier.
  • Estimated Total: Approximately 12–21 business days. Customer review time and agreed revisions may extend this estimate.
  • Duties & Taxes: Delivered Duty Paid (DDP) — Ashdeco covers all import duties, taxes and customs fees.

For made-to-order and personalised pieces, we share photos or videos for your review before finishing and again before dispatch. Finishing begins after you approve the unfinished piece. We pack and ship only after you approve the finished version.

Returns: 30-Day Return Policy, Eligible Issues

If your piece arrives damaged, defective or incorrect due to a fulfillment error, please contact support@ashdeco.com within 30 calendar days of delivery, including your order number and photos. We will review your claim and arrange an appropriate return or replacement. Return shipping for approved claims is fully covered by Ashdeco.

Please note: Made-to-order and personalised pieces are not eligible for returns due to a change of mind or personal preference. This does not affect support for damaged, defective or incorrect items. Please contact us before returning any piece.

Share:
Crescent Arc Driftwood Mushroom Floor Lamp with Gill Glow
$2,880.00

The character is in
the details.

Smooth surface
Smooth surface

A polished, satin-smooth top with a soft sheen. Sealed with a clear protective topcoat for moisture resistance and easy daily care.

Natural rough surface
Natural rough surface

A flat, tactile surface that shows the grain, knots and open pores of the wood. Sealed with a thin matte coat to keep its raw, hand-touched character.

Finish options vary by piece.

A thoughtful fit for your home.

Book a consultation
01

Share your space

Tell us about your room and what you have in mind.

02

Discuss size & finish

We'll guide you through options that fit your home.

03

Confirm the details

Review and finalize your piece with confidence.

An Ashdeco tree-shaped wall bookshelf with fairy lights and ornaments on a green wall, beside a leather armchair, a small tree and wrapped gifts

THE HOLIDAY EDIT

Warmth that stays
beyond the season.

Timeless pieces for more meaningful gatherings at home.

Handcrafted / Factory-made

The difference is in the details.

A closer look at how your piece takes shape.

Wood character

Wood character

Ashdeco

Shaped around the grain.

Typical factory-made

Made to a repeatable design.

The maker

The maker

Ashdeco

A maker you can name.

Typical factory-made

A production team.

Size & finish

Size & finish

Ashdeco

Options for this piece.

Typical factory-made

Set catalog choices.

Explore the craftsmanship

Options vary by piece.

From the workshop to your home

Order Process
& Delivery.

A clear path from first review to final approval.

Made to order with customer approval at each key stage

Your approval comes before shipping.

We pack and ship only after you approve the finished piece.

Have a date in mind?Ask us before ordering

Track your order

Soul of wood

No two tables are ever the same

Every plank carries its own grain, color, and knots. These aren't flaws - they are time's signature, the fingerprint of a tree that lived for decades. When you touch a Ashdeco table, you're touching the years it stood through.

Natural walnut grain with flowing pattern - the unique fingerprint of each plank
Walnut · 1 of 1
Light oak grain with fine, even texture
Oak grain
Natural knot - the mark of a branch that once grew from the trunk
Natural knot
Live edge preserving the tree's natural silhouette
Live edge
Annual growth rings - every ring is one year of the tree's life
Annual rings
100%
Each tabletop is one of a kind - there is no second copy anywhere on Earth
30-80 yrs
Average age of the tree - every grain ring is a season it lived through
0 defects
Knots, mineral streaks, and grain shifts are signatures - never manufacturing flaws
You may also like

More from Driftwood Floor Lamp

View all

What people are searching

Frequently asked questions

Everything you need to know about our pieces, commissions, and care.

How long until my piece arrives?

Shipping itself is quick: 5 to 7 business days once your piece leaves our workshop. Most of the time goes into crafting your piece and your photo approval. We craft your piece, send you photos to approve, and ship it after you approve. Crafting and approval usually take 7 to 14 business days, so the estimated total is 12 to 21 business days. A slow photo approval can extend this. During holidays or busy periods it may take longer, and if there is a significant delay we will email you. All shipments include tracking and insurance.

Do you ship internationally?

Yes, we ship worldwide. We offer free shipping on all orders.

How long does a commission take?

4-8 weeks depending on complexity. A 6-seater dining table takes ~6 weeks, a console cabinet ~4 weeks, a large sideboard ~8 weeks.

Start a commission
How do I take care of my wood piece?

Wipe with a damp cloth. Do not use chemicals. Apply wood oil 1-2 times per year (we include a starter bottle). Avoid direct sunlight and big humidity changes.

What if my piece develops cracks?

Wood expands and contracts with humidity. Minor cracks are natural and part of the material. Major cracks within the first year: we fix free. After 1 year, we charge labor only.

Can I return a piece?

Yes, within 30 days of delivery if your piece has a manufacturer defect or was damaged in shipping. To start, email support@ashdeco.com with your order number and the reason. For defective, damaged or incorrect items we send a prepaid return label and cover return shipping. Once we receive and inspect the returned piece, we send a replacement or a refund. Refunds are processed within 2 business days after we receive your return. Custom or personalized pieces cannot be returned. See our full Refund Policy for exchanges and other details.

Can't find your answer?

Get in touch