A smooth wooden mushroom stands between your credenza and your reading chair, its wide dome cap glowing warm amber from within. The grain of the wood is visible through the cap itself, flowing in cathedral arcs across the illuminated surface like rivers on a topographic map seen from above. The tapered stem rises from a round disc base, wider at the bottom and narrower at the center, then flaring where it meets the underside of the cap. Every surface is turned, sanded, and polished to a seamless satin. No bark. No knots. No rough texture. Just warm wood, clean curves, and golden light.
Translucent Glowing Dome Cap
The cap is a wide, deep half-dome turned from a single block of carefully selected solid wood and thinned across its entire surface to 3-5mm. At this thickness, the built-in LED array inside illuminates the wood from within, turning the grain into a glowing map of flowing amber lines, cathedral arcs, and warm golden fields. The translucency is even across the entire dome because the wall thickness is controlled to sub-millimeter precision during turning. Dark grain lines appear as warm contour shadows. Lighter sapwood zones glow brighter. The effect changes throughout the evening as the dimmer moves from full brightness to a soft golden night glow.
The cap has no gill carving. The light comes through the wood itself, diffused and softened by the grain, creating an even, warm ambient glow without visible rays or hot spots. This is the only cap in the mushroom collection designed for pure diffusion rather than directional gill projection.
Tapered Turned Stem
The stem is turned on a lathe from a single block of matched solid wood. The profile follows a concave taper, wider at the base, narrowing to a slender waist at mid-height, then flaring outward where it joins the underside of the cap. The curve is continuous and mathematically smooth, with no flat spots, steps, or visible tool marks. The grain runs vertically through the stem, showing tight, flowing lines that echo the cathedral patterns on the cap above. Small natural pin knots may appear on the stem surface, adding subtle character without disrupting the clean silhouette.
Round Disc Base
The base is a flat, round disc in the same wood as the stem, proportioned to balance the wide cap above. The disc is thick enough to provide stable weight but slim enough to maintain the lamp's clean, modern proportions. The edge is softly rounded. A felt pad protects the floor. The braided cloth cord exits from the back edge of the base, lying flat along the floor.
Specifications
  • Material: Solid wood, kiln-dried, turned on lathe (cap, stem, base, unified species)
  • Light: Built-in LED array inside translucent cap, warm white, dimmable
  • Power: Braided cloth cord with foot dimmer
  • Cap: Translucent deep half-dome, thinned to 3-5mm, no gill carving
  • Stem: Concave tapered turned profile, seamless satin finish
  • Base: Round disc, matched wood, weighted, felt pad
  • Finish: Natural oil throughout, non-toxic, seamless warm golden satin
Placement
Built for a mid-century modern living room beside a credenza, a Scandinavian bedroom reading corner, a Japandi-styled open-plan space, or a designer apartment where every piece of furniture is curated. The clean lines, warm glow, and pure wood grain appeal to interior designers, architects, and collectors of handcrafted design objects. Place beside a bouclé armchair on a Persian or kilim rug for the definitive MCM composition.
Care
Wipe the cap gently with a soft dry cloth. Reapply wood oil once a year using a light, even hand on the thinned cap surface. Dust the stem and base with a soft cloth. The translucent cap is structurally sealed but should be treated as a precision wood piece. LED components need no maintenance. Avoid excessive moisture, direct sunlight, and impact.
Handcrafted by Vietnamese artisans. The stem is turned from a single block of kiln-dried solid wood. The translucent cap is turned thin enough to glow while maintaining structural integrity, a process that takes hours of careful lathe work per piece. The rejection rate for caps at this diameter and thinness is the highest in the collection. No molds. No CNC machines. No two lamps will ever look the same.
Need a different size? Contact our team to discuss custom height, cap diameter, wood species, or finish preferences.
✔️ Preview your design before production
✔️ Free shipping
✔️ 30-day satisfaction guarantee

Furniture Placement

  •  Position your furniture away from direct sunlight, or use blinds or curtains to reduce sun exposure.
  •  Always set your furniture on a level surface to preserve its balance and structure.

Cleaning & Upkeep

  •  Regularly wipe down your furniture with a soft, dry, or slightly damp cloth.
  •  Avoid using harsh chemicals like bleach or ammonia, as these can ruin the finish and damage the wood.

Weight Capacity & Use

  •  Respect the recommended weight limit for each piece to ensure its durability.
  •  When moving furniture, lift it instead of dragging or pushing to prevent surface scratches or joint damage.

Preventing Mold & Mildew

  •  Quickly wipe up any spills to stop moisture from penetrating the wood.
  •  In areas with high humidity, use a dehumidifier to maintain an ideal moisture balance.

Free Shipping On All Orders

Standard shipping is free on every order, with no minimum purchase required.

Estimated Crafting & Delivery Times

  • Processing & Crafting: Typically 7–14 business days, depending on the piece and design complexity.
  • Transit Time: Approximately 5–7 business days after dispatch, depending on your destination and carrier.
  • Estimated Total: Approximately 12–21 business days. Customer review time and agreed revisions may extend this estimate.
  • Duties & Taxes: Delivered Duty Paid (DDP) — Ashdeco covers all import duties, taxes and customs fees.

For made-to-order and personalised pieces, we share photos or videos for your review before finishing and again before dispatch. Finishing begins after you approve the unfinished piece. We pack and ship only after you approve the finished version.

Returns: 30-Day Return Policy, Eligible Issues

If your piece arrives damaged, defective or incorrect due to a fulfillment error, please contact support@ashdeco.com within 30 calendar days of delivery, including your order number and photos. We will review your claim and arrange an appropriate return or replacement. Return shipping for approved claims is fully covered by Ashdeco.

Please note: Made-to-order and personalised pieces are not eligible for returns due to a change of mind or personal preference. This does not affect support for damaged, defective or incorrect items. Please contact us before returning any piece.

Thy Tran Crafted by

Thy Tran

Turned Wood Mushroom Floor Lamp with Translucent Glowing Cap

SKU: ASPF080426-28
5 out of 5 stars with 400+ reviews 30 Questions
$2,780.00
10% Get 10% off orders $2,000+
Choose your sizeRequest a free consultation22"W x 22"D x 58"H
Choose your wood tone As pictured
Choose your finish Smooth Surface
Free Shipping - Easy Assembly
30-Day Returns
1-Year Warranty
Shipping Insurance
Share:
Thy Tran Crafted by

Thy Tran
Turned Wood Mushroom Floor Lamp with Translucent Glowing Cap
SKU: ASPF080426-28
5 out of 5 stars with 400+ reviews 30 Questions
$2,780.00
10% Get 10% off orders $2,000+
Choose your sizeRequest a free consultation22"W x 22"D x 58"H
Choose your wood tone As pictured
Choose your finish Smooth Surface
Free Shipping - Easy Assembly
30-Day Returns
1-Year Warranty
Shipping Insurance
A smooth wooden mushroom stands between your credenza and your reading chair, its wide dome cap glowing warm amber from within. The grain of the wood is visible through the cap itself, flowing in cathedral arcs across the illuminated surface like rivers on a topographic map seen from above. The tapered stem rises from a round disc base, wider at the bottom and narrower at the center, then flaring where it meets the underside of the cap. Every surface is turned, sanded, and polished to a seamless satin. No bark. No knots. No rough texture. Just warm wood, clean curves, and golden light.
Translucent Glowing Dome Cap
The cap is a wide, deep half-dome turned from a single block of carefully selected solid wood and thinned across its entire surface to 3-5mm. At this thickness, the built-in LED array inside illuminates the wood from within, turning the grain into a glowing map of flowing amber lines, cathedral arcs, and warm golden fields. The translucency is even across the entire dome because the wall thickness is controlled to sub-millimeter precision during turning. Dark grain lines appear as warm contour shadows. Lighter sapwood zones glow brighter. The effect changes throughout the evening as the dimmer moves from full brightness to a soft golden night glow.
The cap has no gill carving. The light comes through the wood itself, diffused and softened by the grain, creating an even, warm ambient glow without visible rays or hot spots. This is the only cap in the mushroom collection designed for pure diffusion rather than directional gill projection.
Tapered Turned Stem
The stem is turned on a lathe from a single block of matched solid wood. The profile follows a concave taper, wider at the base, narrowing to a slender waist at mid-height, then flaring outward where it joins the underside of the cap. The curve is continuous and mathematically smooth, with no flat spots, steps, or visible tool marks. The grain runs vertically through the stem, showing tight, flowing lines that echo the cathedral patterns on the cap above. Small natural pin knots may appear on the stem surface, adding subtle character without disrupting the clean silhouette.
Round Disc Base
The base is a flat, round disc in the same wood as the stem, proportioned to balance the wide cap above. The disc is thick enough to provide stable weight but slim enough to maintain the lamp's clean, modern proportions. The edge is softly rounded. A felt pad protects the floor. The braided cloth cord exits from the back edge of the base, lying flat along the floor.
Specifications
  • Material: Solid wood, kiln-dried, turned on lathe (cap, stem, base, unified species)
  • Light: Built-in LED array inside translucent cap, warm white, dimmable
  • Power: Braided cloth cord with foot dimmer
  • Cap: Translucent deep half-dome, thinned to 3-5mm, no gill carving
  • Stem: Concave tapered turned profile, seamless satin finish
  • Base: Round disc, matched wood, weighted, felt pad
  • Finish: Natural oil throughout, non-toxic, seamless warm golden satin
Placement
Built for a mid-century modern living room beside a credenza, a Scandinavian bedroom reading corner, a Japandi-styled open-plan space, or a designer apartment where every piece of furniture is curated. The clean lines, warm glow, and pure wood grain appeal to interior designers, architects, and collectors of handcrafted design objects. Place beside a bouclé armchair on a Persian or kilim rug for the definitive MCM composition.
Care
Wipe the cap gently with a soft dry cloth. Reapply wood oil once a year using a light, even hand on the thinned cap surface. Dust the stem and base with a soft cloth. The translucent cap is structurally sealed but should be treated as a precision wood piece. LED components need no maintenance. Avoid excessive moisture, direct sunlight, and impact.
Handcrafted by Vietnamese artisans. The stem is turned from a single block of kiln-dried solid wood. The translucent cap is turned thin enough to glow while maintaining structural integrity, a process that takes hours of careful lathe work per piece. The rejection rate for caps at this diameter and thinness is the highest in the collection. No molds. No CNC machines. No two lamps will ever look the same.
Need a different size? Contact our team to discuss custom height, cap diameter, wood species, or finish preferences.
✔️ Preview your design before production
✔️ Free shipping
✔️ 30-day satisfaction guarantee

Furniture Placement

  •  Position your furniture away from direct sunlight, or use blinds or curtains to reduce sun exposure.
  •  Always set your furniture on a level surface to preserve its balance and structure.

Cleaning & Upkeep

  •  Regularly wipe down your furniture with a soft, dry, or slightly damp cloth.
  •  Avoid using harsh chemicals like bleach or ammonia, as these can ruin the finish and damage the wood.

Weight Capacity & Use

  •  Respect the recommended weight limit for each piece to ensure its durability.
  •  When moving furniture, lift it instead of dragging or pushing to prevent surface scratches or joint damage.

Preventing Mold & Mildew

  •  Quickly wipe up any spills to stop moisture from penetrating the wood.
  •  In areas with high humidity, use a dehumidifier to maintain an ideal moisture balance.

Free Shipping On All Orders

Standard shipping is free on every order, with no minimum purchase required.

Estimated Crafting & Delivery Times

  • Processing & Crafting: Typically 7–14 business days, depending on the piece and design complexity.
  • Transit Time: Approximately 5–7 business days after dispatch, depending on your destination and carrier.
  • Estimated Total: Approximately 12–21 business days. Customer review time and agreed revisions may extend this estimate.
  • Duties & Taxes: Delivered Duty Paid (DDP) — Ashdeco covers all import duties, taxes and customs fees.

For made-to-order and personalised pieces, we share photos or videos for your review before finishing and again before dispatch. Finishing begins after you approve the unfinished piece. We pack and ship only after you approve the finished version.

Returns: 30-Day Return Policy, Eligible Issues

If your piece arrives damaged, defective or incorrect due to a fulfillment error, please contact support@ashdeco.com within 30 calendar days of delivery, including your order number and photos. We will review your claim and arrange an appropriate return or replacement. Return shipping for approved claims is fully covered by Ashdeco.

Please note: Made-to-order and personalised pieces are not eligible for returns due to a change of mind or personal preference. This does not affect support for damaged, defective or incorrect items. Please contact us before returning any piece.

Share:
Turned Wood Mushroom Floor Lamp with Translucent Glowing Cap
$2,780.00

The character is in
the details.

Smooth surface
Smooth surface

A polished, satin-smooth top with a soft sheen. Sealed with a clear protective topcoat for moisture resistance and easy daily care.

Natural rough surface
Natural rough surface

A flat, tactile surface that shows the grain, knots and open pores of the wood. Sealed with a thin matte coat to keep its raw, hand-touched character.

Finish options vary by piece.

A thoughtful fit for your home.

Book a consultation
01

Share your space

Tell us about your room and what you have in mind.

02

Discuss size & finish

We'll guide you through options that fit your home.

03

Confirm the details

Review and finalize your piece with confidence.

An Ashdeco tree-shaped wall bookshelf with fairy lights and ornaments on a green wall, beside a leather armchair, a small tree and wrapped gifts

THE HOLIDAY EDIT

Warmth that stays
beyond the season.

Timeless pieces for more meaningful gatherings at home.

Handcrafted / Factory-made

The difference is in the details.

A closer look at how your piece takes shape.

Wood character

Wood character

Ashdeco

Shaped around the grain.

Typical factory-made

Made to a repeatable design.

The maker

The maker

Ashdeco

A maker you can name.

Typical factory-made

A production team.

Size & finish

Size & finish

Ashdeco

Options for this piece.

Typical factory-made

Set catalog choices.

Explore the craftsmanship

Options vary by piece.

From the workshop to your home

Order Process
& Delivery.

A clear path from first review to final approval.

Made to order with customer approval at each key stage

Your approval comes before shipping.

We pack and ship only after you approve the finished piece.

Have a date in mind?Ask us before ordering

Track your order

Soul of wood

No two tables are ever the same

Every plank carries its own grain, color, and knots. These aren't flaws - they are time's signature, the fingerprint of a tree that lived for decades. When you touch a Ashdeco table, you're touching the years it stood through.

Natural walnut grain with flowing pattern - the unique fingerprint of each plank
Walnut · 1 of 1
Light oak grain with fine, even texture
Oak grain
Natural knot - the mark of a branch that once grew from the trunk
Natural knot
Live edge preserving the tree's natural silhouette
Live edge
Annual growth rings - every ring is one year of the tree's life
Annual rings
100%
Each tabletop is one of a kind - there is no second copy anywhere on Earth
30-80 yrs
Average age of the tree - every grain ring is a season it lived through
0 defects
Knots, mineral streaks, and grain shifts are signatures - never manufacturing flaws
You may also like

More from Driftwood Floor Lamp

View all

What people are searching

Frequently asked questions

Everything you need to know about our pieces, commissions, and care.

How long until my piece arrives?

Shipping itself is quick: 5 to 7 business days once your piece leaves our workshop. Most of the time goes into crafting your piece and your photo approval. We craft your piece, send you photos to approve, and ship it after you approve. Crafting and approval usually take 7 to 14 business days, so the estimated total is 12 to 21 business days. A slow photo approval can extend this. During holidays or busy periods it may take longer, and if there is a significant delay we will email you. All shipments include tracking and insurance.

Do you ship internationally?

Yes, we ship worldwide. We offer free shipping on all orders.

How long does a commission take?

4-8 weeks depending on complexity. A 6-seater dining table takes ~6 weeks, a console cabinet ~4 weeks, a large sideboard ~8 weeks.

Start a commission
How do I take care of my wood piece?

Wipe with a damp cloth. Do not use chemicals. Apply wood oil 1-2 times per year (we include a starter bottle). Avoid direct sunlight and big humidity changes.

What if my piece develops cracks?

Wood expands and contracts with humidity. Minor cracks are natural and part of the material. Major cracks within the first year: we fix free. After 1 year, we charge labor only.

Can I return a piece?

Yes, within 30 days of delivery if your piece has a manufacturer defect or was damaged in shipping. To start, email support@ashdeco.com with your order number and the reason. For defective, damaged or incorrect items we send a prepaid return label and cover return shipping. Once we receive and inspect the returned piece, we send a replacement or a refund. Refunds are processed within 2 business days after we receive your return. Custom or personalized pieces cannot be returned. See our full Refund Policy for exchanges and other details.

Can't find your answer?

Get in touch