Three Ribbons of Driftwood, One Solid Piece

Three thick ribbons of driftwood twist around each other from the floor to the shade, spiraling upward in a tight braid that opens and closes as it climbs. This is not three pieces wrapped together. The entire twist of this wooden floor lamp is carved from a single solid column of driftwood, with the material between the ribbons removed by hand. The grain flows continuously through each ribbon, following the spiral path, giving the structure its strength despite the extensive material removal.

Carved by Hand in Vietnam

Our artisans start with a solid driftwood cylinder and carve inward from every angle, following the grain, until only the three ribbons remain. No CNC routing. No laser cutting. No factory assembly. Each piece takes weeks to complete. The spiral carving is the most demanding technique in our workshop because one wrong cut through a ribbon means starting over from a new blank.

No Two Will Ever Match

No glued joints. No MDF. No composite. Solid driftwood throughout, and because every blank has different grain, the driftwood floor lamp you receive will not exist on any other piece. The outer surfaces carry the grey-brown patina that driftwood develops over years of exposure to wind, water, and sun. The inner faces, visible through the gaps where the ribbons separate, glow warm amber from the LED light source hidden inside the hollow center column.

Where the carving cut through to fresh wood beneath, warmer tones appear: honey, caramel, and golden brown. That contrast between aged exterior and fresh interior changes with every quarter-turn of the spiral as different faces catch or lose the room light.

Light Through Wood

Round holes of varying sizes are drilled through each ribbon at irregular intervals. Some pass all the way through, projecting small golden circles onto the nearest wall. Others stop partway into the wood, creating shallow wells that glow from within. The hole placement follows the natural features of the driftwood: knots, grain swirls, and color transitions that become visible when backlit.

A linen drum shade sits on top (neutral warm grey), providing even ambient room light from above. Below the shade, the twisted driftwood body provides a second layer of accent light through the perforated holes and the gaps between ribbons. The two light sources work together or independently using the inline dimmer on the cord.

The Base

A thick round disc of driftwood, cross-cut to expose growth rings, with the natural bark edge left on and sealed. Wide enough to keep this tall wooden floor lamp stable on carpet or hardwood.

Placement and Care

• Dry indoor use only. Driftwood is stable in climate-controlled rooms but responds to humidity swings. Not suitable for bathrooms or outdoor spaces.
• Dust the outer surfaces with a soft cloth. Compressed air works for the holes and inner gaps between ribbons.

Fully Customizable

Need a different height, shade fabric, or a matched pair with similar driftwood tone? Every piece is handcrafted and fully customizable. Contact our team with your requirements.

Furniture Placement

•  Position your furniture away from direct sunlight, or use blinds or curtains to reduce sun exposure.
•  Always set your furniture on a level surface to preserve its balance and structure.

Cleaning & Upkeep

•  Regularly wipe down your furniture with a soft, dry, or slightly damp cloth.
•  Avoid using harsh chemicals like bleach or ammonia, as these can ruin the finish and damage the wood.

Weight Capacity & Use

•  Respect the recommended weight limit for each piece to ensure its durability.
•  When moving furniture, lift it instead of dragging or pushing to prevent surface scratches or joint damage.

Preventing Mold & Mildew

•  Quickly wipe up any spills to stop moisture from penetrating the wood.
•  In areas with high humidity, use a dehumidifier to maintain an ideal moisture balance.

Free Shipping On All Orders

Standard shipping is free on every order, with no minimum purchase required.

Estimated Crafting & Delivery Times

• Processing & Crafting: Typically 7–14 business days, depending on the piece and design complexity.
• Transit Time: Approximately 5–7 business days after dispatch, depending on your destination and carrier.
• Estimated Total: Approximately 12–21 business days. Customer review time and agreed revisions may extend this estimate.
• Duties & Taxes: Delivered Duty Paid (DDP) — Ashdeco covers all import duties, taxes and customs fees.

For made-to-order and personalised pieces, we share photos or videos for your review before finishing and again before dispatch. Finishing begins after you approve the unfinished piece. We pack and ship only after you approve the finished version.

Returns: 30-Day Return Policy, Eligible Issues

If your piece arrives damaged, defective or incorrect due to a fulfillment error, please contact support@ashdeco.com within 30 calendar days of delivery, including your order number and photos. We will review your claim and arrange an appropriate return or replacement. Return shipping for approved claims is fully covered by Ashdeco.

Please note: Made-to-order and personalised pieces are not eligible for returns due to a change of mind or personal preference. This does not affect support for damaged, defective or incorrect items. Please contact us before returning any piece.